FPC's Shadow Line Process Flow (Shadow)

19 Jul,2020

The shadow process is suitable for high-end FPC ,5G products, and the mainstream process of high-end PFC, which is increasingly adopted by high-end FPC manufacturers. At present, the market mainly represents the potion merchants: Medemei, Les. Shenzhen Feishida Machinery Equipment Company and Medemei Company have successfully cooperated with many pieces of equipment, and many companies are in mass production.

Acid etching automatically added

27 Jun,2020

Recently, due to the rapid growth of our orders, we have expanded production and started a garden-style factory with an area of 8000 square meters. Production capacity and image have been improved, and the enrollment of production staff has doubled. Meet production needs. The new workshop is clean and orderly, and the R & D office and the comprehensive office have a new look. Entertainment venues complete, table tennis table, staff after work entertainment. With a new mental outlook, to provide customers with better service.

Comprehensive intelligent automated production to fill the loopholes in intelligent production

27 May,2020

At present, many PCB manufacturers have bought the ranks of industrial 4.0, and have greatly promoted the connection of various equipment to save people. Various equipment parameters enter the MES system, which is convenient for management and greatly improves the quality and output. But the continuous production of equipment, equipment maintenance can not be ignored. Due to automation and unmanned workshops, the number of operators is relatively small, and there is no manpower for maintenance.

Soft board FPC roll-to-roll production line

14 Sep,2023

Our company produces FPC roll-to-roll equipment. Development, etching, film removal, cleaning, sandblasting, OSP, shadow, black hole and other processes, automatic roll-to-roll winding, automatic roll-to-roll plate placement, automatic deviation correction, etc., automatic roll change. Save manpower and increase production capacity.

The production method of the backlit FPC black hole plate surface indentation device is described.

11 May,2020

The FPC black hole line is a highly reliable and excellent flexible printed circuit board made of polyimide or polyester film. In the production process, it has the characteristics of high wiring density, light weight, thin thickness and good bending property. In order to prevent too many open and short circuits from causing too low yield or reduce the problems of scrapping and replenishing FPC black-hole wire boards caused by rough process problems such as drilling, calendering and cutting, and to evaluate how to select materials to achieve the best results for customers, prenatal pretreatment is especially important. The thick thickness of the copper plate used on the traditional FPC can not effectively conduct information, but also increase the volume of the circuit board, and the traditional production process of FPC will produce indentation on the board, but can not effectively deal with the indentation, seriously affecting the appearance of the board. To this end, we designed a new type of backlit FPC black hole plate surface indentation device, which solved the problem of the inconvenience of the traditional backlit FPC black hole plate surface indentation device.

What are the common PCB boards?

16 Apr,2020

At present, the common PCB board materials on the market are mainly insulating materials, metal copper and solder. Moreover, our common PCB boards can be divided into three types of single-sided PCB boards, double-sided PCB boards and multi-layer PCB boards. See specific introduction below:

What are the major requirements for the technical characteristics of backlit FPC black hole plate

11 May,2020

1. Backlight FPC black hole plate surface indentation device, comprising a feeding roller (1), a calendering device (2), a cleaning device (3), a cutting device (4) and an oven (5), characterized in that: the The bottom of the feeding roller (1) is connected with a fixed plate (7) through a support rod, and the fixed plate (7) is provided with a cutting device (4) and a conveyor belt (8), the cutting equipment (4) is fixedly connected with the fixed plate (7), one end of the conveyor belt (8) is arranged inside the cutting equipment (4), the bottom of the conveyor belt (8) is connected with the ground through a connecting rod, the lower part of the conveyor belt (8) is provided with an oven (5), the oven (5) is connected with the connecting rod through a cross rod, and the lower part of the oven (5) is provided with a storage room (9), the left side of the feeding roller (1) is provided with a calendering device (2), the feeding roller (1) and the calendering device (2) are connected by a copper plate (6), and the lower part of the calendering device (2) A cleaning device (3), the calendering device (2) is connected to the cleaning device (3) through a copper plate (6), the cleaning device (3) is connected to the cutting device (4) via a copper plate (6).

Profit of FPC laser cutting machine

29 Aug,2018

Each processing manufacturer turns its focus to laser technology. Profit is the primary problem for every investor. To choose laser equipment for processing, for the enterprise, the lack of understanding of profit is one point. On the other hand, it is not enough for the operation. How much profit can FPC laser cutting machine bring to the enterprise in one year?